Care Guide for Rubber Paving Stones
Rubber paving stones are extremely easy to maintain and durable. With these simple tips, you can keep your surface in excellent condition for years.
Key Points at a Glance
BORRAG rubber paving stones are weather-resistant, frost-proof, and UV-stable. Normal dirt can simply be swept or rinsed off. Special care products are not required.
Regular Cleaning
Basic care for lasting beauty
- Sweep the surface regularly with a broom to remove leaves, dirt, and sand.
- Rinse the surface with a garden hose as needed.
- For heavier soiling, you can use a pressure washer (max. 100 bar, min. 30 cm distance).
- Let the stones dry well after cleaning.
Frequency: As needed, at least 2-4 times per year
Stain Removal
How to remove stubborn stains
- Oil and grease stains: Treat with dish soap and warm water, let sit and remove with soft brush.
- Bird droppings: Rinse off while fresh, soak dried stains.
- General stains: Use neutral cleaner, no aggressive chemicals.
Frequency: As needed
Moss & Algae Removal
Effectively combat green deposits
- Remove mechanically with a broom.
- Pressure washer can help with heavy infestation.
- Special green deposit removers are possible but usually not necessary.
- Prevention: Ensure good drainage and avoid standing water.
Frequency: Check in spring and autumn
Winter Care
Safe through the cold season
- Snow can be removed normally with snow shovel or broom.
- Rubber paving stones are frost-resistant down to -30°C.
- Road salt is harmless and does not attack the material.
Frequency: As needed in winter
Long-term Care
For a long service life
- Check the secure fit of the stones annually.
- Refill joint material as needed.
- Remove weeds from joints early.
- If sinking occurs: Lift stone, add grit and reset.
Frequency: Annual inspection recommended
Do's
- Sweep regularly and rinse as needed
- Remove stains promptly
- Use neutral cleaner for stubborn dirt
- Refill joints as needed
- Keep drainage clear
Don'ts
- No harsh or corrosive cleaning agents
- No pressure washer above 100 bar
- No sharp objects for scraping
- No heavy vehicles without suitable substructure
- No open flames directly on the stones
Common Care Questions
How long do rubber paving stones last?
With normal use and care, you can expect a lifespan of 15-25 years. UV stabilization ensures that colors remain vibrant for a long time.
Can I use a pressure washer?
Yes, but with caution. Use a maximum of 100 bar pressure and maintain at least 30 cm distance. Too high pressure can damage the surface.
What to do about discoloration?
Slight discoloration from weathering is normal and does not affect functionality. For heavy stains, thorough cleaning with neutral cleaner usually helps.
Questions about care?
We are happy to help and advise you on your project.